Device setup & Specification
If the delay switch is set to one of the
hour
marks,
LightwaveRF device will still be
turned on at the preset light level;
however, once the specified amount
of time has elapsed, the Sensor will
automatically
command, and the receiver will turn
o .
NOTE: If the RF range between the transmitter and receiver is too great to
achieve reliable operation, the LightwaveRF Connect Signal Booster may be
used in conjunction with this product to increase the signal strength over
greater distances.
Specification
RF frequency: 433.92 MHz
Input rating: 1.5V (2 x AAA Batteries)
Range: 15m (indoors)
Warranty: 2 year standard warranty
IP56 Approved.
then
the
linked
send
an
'o '