Advertisement
Setting the humidity level
1
Touch the humidity button
repeatedly to set the desired air
humidity to 40%, 50%, 60% or "
Note
• When the humidity level "
chosen, the appliance will keep
humidifying the room until the
ambient humidity level reaches
70%RH.
Note
• When the target humidity level is
reached, the wick wheel will stop
rotating. It will start rotating again
when the humidity drops below the
target level.
• If you want to increase the humidity
level quickly, you can select a
higher fan speed.
38
EN
Switching the operation
mode
The appliance has two operation
".
modes, the purification ONLY mode and
the 2-in-1 mode.
1
Touch the mode selection button
" is
to switch to the purification ONLY
mode.
»
2
Touch the mode selection button
again to switch to the 2-in-1 mode.
»
» The current humidity level
Note
• The screen will display humidity
level for 3 seonds and change to
display the highest level of IAI or
PM2.5 if one of which is not good.
displays on the screen when
the appliance operates in the
purification ONLY mode.
displays on the screen when
the appliance operates in the
2-in-1 mode.
displays on the screen by default.
Advertisement
