Advertisement
4
Take the used NanoCloud rotary
humidification wick out.
5
Remove all packaging material
of the new NanoCloud rotary
humidification wick.
6
Place the new NanoCloud rotary
humidification wick in the wick
wheel, and then fasten the locks on
the wick wheel.
50 EN
7
Place the wick wheel on the wick
support.
Note
• When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.
8
Place the water tray and water tank
back into the appliance.
9
Touch and hold
to reset the NanoCloud rotary
humidification wick lifetime counter.
for 3 seconds
Advertisement
