Advertisement
3
Place the new NanoProtect filter
into the appliance.
4
Touch and hold
reset the NanoProtect filter lifetime
counter .
Replacing the
NanoCloud rotary
humidification wick
Filter alert light
status
F1 is displayed
and the filter
replacement light
flashes on the
screen.
for 3 seconds to
Follow this
Replace the
NanoCloud
rotary
humidification
wick
1
Take the wick wheel off the wick
support.
2
Grip the shaft screw on the
other side of the wheel, rotate it
anticlockwise to release the wick
from the wheel.
3
Unfasten the locks on the edge
of the wheel successively to
disassemble the wick wheel.
EN
49
Advertisement
