Table of Contents
Advertisement
■ ACTIVE MODULE MAP
Indicates the slots where I/O modules are mounted. When the module is mounted, the corresponding bit turns to "1."
272
■ STATUS
Communication status data. When one or more I/O modules are mounted on the base, the corresponding bit turns to "0."
288
■ CHANNEL STATUS
Channel Status shows the I/O module's data error.
- Input overrange (≤ -15% or ≥ 115%) of Input modules except R6x-TSx and R6x-RSx.
- Inputs of R6x-TSx, R6x-RSx burnout.
- Output wire breakdown of R6x-YSx (Firmware Version 2.00 or later).
In the above case, the corresponded bit is "1."
• Data Allocation Mode 1
304
320
In the Data Allocation Mode 2, the LSB is used for channel 1, and the MSB for channel 2, of an analog module.
257
Module address 0
Module address 1
Module address 2
Module address 15
273
"0"
"0"
"0"
"0"
I/O Module Found (0 : I/O module(s) found, 1 : No I/O module found)
"0"
"0"
"0"
Internal Communication Counter
(Every Internal Communication Cycle Adds +1)
289
Module address 0
Module address 1
Module address 2
Module address 15
305
Unused
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
• Data Allocation Mode 2
304
320
R6-NE1
289
Module address 0
Module address 1
Module address 2
Module address 7
305
Module address 8
Module address 9
Module address 10
Module address 15
EM-7787 Rev.7 P. 8 / 9
Advertisement
Table of Contents
