Table of Contents
Advertisement
EXTERNAL VIEWS
■ FRONT VIEW (with the cover open)
OUTPUT RANGING
The internal DIP switch setting is required to select output
types before setting a precise output range using PC Con-
figurator Software (model: M6CFG).
For detailed information on the PC configuration, refer to
the M6CFG users manual.
Table 1. DIP switch setting: Output type
Output
Type
1
2
0 – 20mA*
ON ON OFF OFF OFF OFF ON OFF
1
-5 – +5V
OFF OFF ON OFF ON OFF OFF ON
-10 – +10V OFF OFF ON OFF OFF ON OFF ON
*1. For 0 – 1mA range, set switches as in the table below.
Output
Range
1
2
0 – 1mA
OFF OFF ON OFF OFF OFF ON OFF
SEN TRONIC
AG
Produkte, Support und Service
■ SIDE VIEW
Power LED
Status Indicator LED
Configurator Jack
SW1
3
4
5
6
7
SW1
3
4
5
6
7
Rugghölzli 2
CH - 5453 Busslingen
5
6
7
8
1
2
3
4
CHECKING
1) Terminal wiring: Check that all cables are correctly con-
nected according to the connection diagram.
2) Check DIP switch setting.
3) Power input voltage: Check voltage across the terminal
7 – 8 with a multimeter.
4) Input: Check that the input signal is within 0 – 100% of
the full-scale.
5) Output: Check that the load resistance meets the de-
scribed specifications.
8
STATUS INDICATOR LED
The transmitter is provided with a status indicator LED
which flashes in different patterns indicating various oper-
ating status.
The following figure indicates typical patterns.
8
TRANSMITTER STATUS
Normal operating mode
Abnormal operating mode
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
M6DXF1
Output Range Selectors
LED ON-OFF PATTERNS
80 milliseconds
ON
EM-7847 Rev.2
P. / 5
mailbox@sentronic.com
www.sentronic.com
OFF
Advertisement
Table of Contents
