Table of Contents
Advertisement
2.
Slide the cable through the black grommet, and then through the end cap.
Grommet
3.
Strip the cable's black outer jacket back approximately 1 ½" (40mm) from
the end to expose the armor and wire leads.
4.
Bend the exposed armor backward over the outer jacket.
5.
Remove the paper and 25 mm (1 inch) of inner jacket to expose the braided
shield.
ARMORED CABLE SPLICE KIT. MODELS 4500-9-HDF1 AND 4500-9-HDF2 | SPLICING PREP | 3
Removable End Cap
Armor
Inner Jacket
Braided Shield
Advertisement
Table of Contents
