Table of Contents
Advertisement
2.
MAKING THE SPLICE
2.1 CONNECT THE WIRES
Use the provided Posi-Lock connectors to connect the wire leads together, color
to color, including the bare shield wire. Alternatively, the cable conductors can
be soldered together.
Use the Posi-Lock connectors as follows:
1.
Unscrew and remove the ends from the center of the Posi-Lock connector.
2.
Insert one bare wire end through one of the Posi-Lock end.
3.
Insert the matching other bare wire end through the other Posi-Lock end.
ARMORED CABLE SPLICE KIT. MODELS 4500-9-HDF1 AND 4500-9-HDF2 | MAKING THE SPLICE | 9
Advertisement
Table of Contents
