Unarmored Cable - Geokon 4500-9-HDF1 Instruction Manual

1.1.2 UNARMORED CABLE

For preparing black armored cable, please refer to Section 1.1.1.
1. Slide the blue 02-250V6 unarmored cable through outer end of the Kellems
grip and and through the fitting nut.
2. Slide the blue cable through the black grommet and end cap.
3. Strip the cable's blue outer jacket back approximately 40 mm (1 ½ inches)
from the end to expose the mylar-coated twisted-pair of wire leads.
4. Unwind the leads to separate the pair and the shield wire.
ARMORED CABLE SPLICE KIT. MODELS 4500-9-HDF1 AND 4500-9-HDF2 | SPLICING PREP | 5
Fitting Nut
Grommet Removable End Cap