3.
Slide the cable through the black grommet, and then through the connector
adapter.
4.
Continue to slide the cable through the tube until it protrudes from the end.
5.
Strip the cable's black outer jacket back approximately 40 mm (1.5 inches)
from the end to expose the armor and wire leads.
6.
Bend the exposed armor backward over the outer jacket.
Armor
ARMORED CABLE SPLICE KIT. MODELS 4500-9-HDF1 AND 4500-9-HDF2 | SPLICING PREP | 7
Connector Adapter
Grommet
Tube