Table of Contents
Advertisement
d
count
OWll
Changing the cooking time
The display
counts down the time
to show how much time is left In the
first cycle.
When the cooking
time ends, "End" will
show on the Display
and 4 beeps
will
sound. (You can stop the beeping
by
opening
the door or by touching
CAN-
CEL.) "End" will remain on the Display
and a beep
will sound every 30 second
[to remind you that food is left in the
oven] until door is opened
or CANCEL is
touched.
The Display
will then show the
time of day.
Cooking
time can be changed
any time before touching
START or during the cycle:
1. Touch COOK 1.
2. Touch numbers
for the new time.
3. Touch START.
Cook 1 will continue
cooking
for the new time.
Cooking at lower cook powers
For best results, some recipes
call for lower Cook Powers. The lower the Cook Power, the
slower the cooking.
Each Number
Pad also stands for a different
percentage
of Cook Power,
Many recipes
in your MICRO MENUS" Cookbook
tell you, by number, which Cook Power to use.
Recipes
in other books and magazines
may tell you by name (HI, MED, LO, etc.) or
percentage
(IO%, 50%, BO%, etc.).
The following
chart gives the percentage
of Cook Power each Number
Pad stands for, and
Cook Power name usually used.
automatic
100% of full power
HIGH
9 = 90% of full power
B =
80% of full power
7 =
70% of full power
MED-HIGH
6 = 60% of full power
5 = 50% of full power
MED
4 = 40% of full power
3 = 30% of full power
MED-LOW
2 = 20% of full power
1 7 10% of full power
LOW
0 7 no power [fan and light will be off)
DO THIS...
THIS HAPPENS...
1.
Put food in me oven and
close the door.
2.
Touch COOK 1.
3. Touch Number Pads for the
cooking time you want.
The COOK 1 Indicator
Light will
come on and the Display
will show
four O's
The Display
will show the numbers
you touched
in the order you
touched them.
This example
shows
7 minutes, 30 seconds.
continued
on next page
9
Advertisement
Table of Contents
