Number - Whirlpool MW87OOXS Use And Care Manual

. .
m .a .
4.
Touch COOK POWER.
5. Touch a Number Pad for the
Cook Power you want.
6. Touch START.
The COOK POWER Indicator Light will
come on and the Display will show
"P-HI:' This shows the oven is pre-
programmed to cook at full (HIGH)
power.
The Display will show what you
touched. This example shows you
touched Number Pad 5 for 50% of
full power.
The COOK 1 and COOK POWER
Indicator Lights will stay on to show
that the oven is cooking in the first
cycle at a Cook Power other than
high.
The Display counts down the time to
show how much cooking time is left
in the first cycle.
For 2 of every 10 seconds, the Display
will show the Cook Power you
selected.
When the cooking time ends, "End" will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching CAN-
CEL.) "End" will remain on the Display
and a beep will sound every 30 seconds
(to remind you that food is left in the
oven] until door is opened or CANCEL is
touched. The Display will then show the
time of day.
Changing cook power
The
Cook Power
can be changed any time before touching START or during the cycle
. Touch COOK POWER.
l
Touch a number for the new Cook Power.
l
Touch START. The cycle will cook at the new Cook Power for the original time.
OR...
l
Touch COOK POWER
twice
if you want to change a lower Cook Power to HIGH.
l
Touch START.
10