Number - Whirlpool MW87OOXS Use And Care Manual

2.
Touch TIME
(Opfion: Sklp to step 6 if
you want to use the pre-
set cooklng time and
Cook Power.)
3. Touch a Number Pad for
the new cooking time you
want from 1 to 9 minutes.
4.
Touch COOK POWER.
(Opflon: Sklp to step 6 If
you want to cook at high
power.)
5. Touch a Number pad for
the Cook Power you want.
6. Touch START.
d
COdI
own
The AUTO SET Indicator Light will
come on and the Display will show
2 minutes, 30 seconds (or the
time you have set as your favorite
cycle).
The Display will show what you
touched in even minutes. This
example shows 4 minutes.
The COOK POWER Indicator Light will
come on and the Display will show
"P-HI!' This shows the oven is pre-
programmed to cook at full (HIGH)
power.
The Display will show what you
touched. This example shows you
touched Number Pad 5 for 50% of
full power.
The AUTO SET Indicator Light will
stay on while the oven is cooking in
the preprogrammed cycle. If you
selected a Cook Power other than
high, the Cook Power Signal Light
will also come on. This shows you
the oven is cooking at a selected
Cook Power.
The Display counts down the time
to show how much cooking time
is left
For 2 of every 10 seconds, the
Display will show the Cook Power
you selected, if you are using a
Cook Power other than high.
When Cook 2 ends, "End" will show
on the Display and 4 beeps will
sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) "End" will remain on the
Display and a beep will sound
every 30 seconds (to remind you
that food is in the oven] until door is
opened or CANCEL is touched.
The Display will then show the
time of day.
NOTE:
You can set COOK I or COOK 1 and 2 to follow Auto Set TIME. (See pages Ii, 12 and
13 for instructions.]
14