Table of Contents
Advertisement
Additional
information:
l
Temperature
may be changed
after START is touched
by touching
TEMP the new
number
and START.
l
Auto Set TEMP will follow the last COOK cycle
if programmed.
l
"PROB" will show on the Display
after START is touched
if the probe
is not plugged
into the oven. This will
only
appear
when Auto Set TEMP has been selected
alone, or
between
the last COOK cycle
and Auto Set TEMP selection.
l
"ERR" will show on the Display
after START is touched,
if an incorrect
temperature
has
been selected
(under 90°F or over 200°F).
l
See "Hints for using the temperature
probe"
on pages
21 and 20.
Defrosting
Use QUICK DEFROST to thaw frozen food before cooking.
For suggested
defrost times, see
the guide
behind
the oven door or in your MICRO MENUS" cookbook.
DO THIS...
1.
Put frozen food in the oven
and close the door.
2.
Touch QUICK DEFROST.
3. Touch Number Pads for the
defrosting time you want.
4.
Touch START.
THIS HAPPENS...
The QUICK DEFROST Indicator
Light
will come on and the Display
will
show four 0's.
The Display
will show the number
you touched
in the order you
touched them.
This example
shows 2 minutes, 45 seconds.
The QUICK DEFROST Indicator
Light
will stay on to show that the oven is in
the Quick Defrost Cycle.
The Display
counts down the time to
show how much defrosting
time is left
When the defrost time ends, "End" will
show on the Display
and 4 beeps
will
sound. (You can stop the beeping
by
opening
the door or by touching
CANCEL.) "End" will remain on the
Display
and a beep
will sound every 30
seconds
[to remind you that food is
in the oven] until door is opened
or
CANCEL is touched.
The Display
will
then show the time of day.
Advertisement
Table of Contents
