With The Temperature Probe; Number - Whirlpool MW87OOXS Use And Care Manual

Whirlpool microwave oven use and care guide mw87ooxs
Table of Contents

Advertisement

5. Touch a Number Pad for
the Cook Power you want.
The Display
will show what you
touched.
This example
shows you
touched
Number
Pad 5 for 50% of
full power.
6.
Touch START.
The AUTO SET and PROBE TEMP
Indicator
Lights will stay on.
The Display
will show "CCCL" to
show the food is less than 90°F
As the food cooks the Display
will
show the internal
temperature
of
the food for every 5°F increase.
For 2 of every 10 seconds,
the
Display
will show the Cook Power
you selected,
if you are using a
Cook Power other than high.
When the probe
senses the tem-
perature
you selected,
the oven
shuts off. "End" will show on the
Display
and 4 beeps
will sound.
(You can stop the beeping
by
BEEP BEEP BEEP BEE
p opening
the door or by touching
CANCEL.] "End" will remain
on the
Display
and a beep
will sound
every 30 seconds
(to remind you
that food is left in the oven)
until door is opened
or CANCEL is
touched.
The Display
will then
show the time of day.
NOTE: You can set Auto Set TEMP to follow COOK 1 or COOK 1 and
2. See pages
11 and
12 for instructions.
Auto Set TEMP can be programmed
with the temperature
probe
out, but
the oven will pause
between
the last Cook cycle
and TEMP"PROB" will show on the
Display
to remind
you to plug in the probe.
Changing the pre-programmed
selling
You can change
the pre-programmed
temperature
and Cook Power in Auto Set TEMP
to the temperature
and power you most often use. To change
the Auto Set TEMP setting,
follow these steps:
1.
Insert at least Y3 of the temperature
probe
into the food.
2. Place food in the oven and close the door.
3. Touch TEMP twice.
4. Touch the Number
Pads for the new desired
temperature
between
90°F and 200°F
If high Cook Power is desired,
skip to Step 6.
5. Touch COOK POWER.
6. Touch the Number
Pad for the desired
Cook Power.
7. Touch START. The oven will cook to the new temperature
at the Cook Power you
selected.
After the cooking
is complete,
the oven will remember
that temperature
and
Cook Power Tor future use.
NOTE: If the electric
power goes off, the oven will go
back to the pre-programmed
165°F at hlgh Cook Power setting.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mw8700xs

Table of Contents