Operation - Westfalia YL-B08 Instruction Manual

Before first Use
Unpack the radiator and check the unit for any damage in transit. Dispose of
packaging materials or store it out of reach of children. Plastic bags etc. may
become a deadly toy for children. Before first use, clean the housing as described
in chapter "Cleaning".
Intended Use
The radiator is designed for heating up small rooms as mains heater or as
auxiliary heater. Only use the radiator indoors and operate the radiator with the
footplates and casters firmly mounted. The radiator is not for outdoor use.
Product Specifications
The radiator is a 7-fin oil filled heater. The radiator is equipped with a thermostat
switch (1) for maintaining the desired temperature. As soon as the unit is switch
on and heat up, the control light (5) turns on. The thermostat switch controls the
room temperature and turns the unit on and off.
The radiator is also fitted with overheating protection. This overheating protection
turns off the unit in case of overheating. After a sufficient cooling time the radiator
is turned on again.
Please keep in mind that the radiator is switched off if the 4 step switch is in the
position 0. If you do not use the radiator for long time, unplug from power mains.
Assembly
1. Attach the casters to the footplates (3) with the included nuts. Tighten the
nuts.
2. Turn the radiator upside down so the cable storage (2) in upwards.
3. Fasten the footplates with the included mounting material (brackets and wing
nuts) on the fins of the radiator.

Operation

Plug the power plug into a grounded socket. The radiator is now ready for use.
The unit is equipped with a 4 step switch (7):
At the setting 0 the radiator is switched off.
At the setting I the thermostat is adjusted to the lowest temperature level and at
the setting III the thermostat is adjusted to the max. temperature.
Operation
6