Table of Contents
Advertisement
User Tasks
2.2 Configuring the Windows Ethernet Interface
To specify the Ethernet address for the interface used with SIMATIC communication, follow
these steps:
1. Open the Windows control panel.
2. From the control panel, open: Network Connections > Local Area Network
3. Click the Properties button on the "Local Area Connection Status" dialog.
4. Scroll to and double-click the "Internet Protocol (TCP/IP)" connection from the list.
5. On the "Internet Protocol (TCP/IP) Properties" dialog, select the button for "Use the
following IP address," and enter the required IP address and subnet mask (the default
values are "192.168.1.2" for the field "IP address" and "255.255.255.0" for the field
"Subnet mask"):
Figure 2-5
6. Click OK on the "Internet Protocol (TCP/IP) Properties" and "Local Area Connection
Properties" dialog, and close the remaining dialogs.
40
Ethernet Control Panel Configuration
Microbox 427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX
Manual, 12/2007, A5E01217837-01
Advertisement
Table of Contents
