Operation - Stadler Form Blender Five Black Edition Operating Instructions Manual

• Always use your appliance from a power outlet of the voltage (A.C. only)
marked on the appliance.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
• The temperature of accessible surfaces may be high when the appliance
is operating.
• Never leave an appliance unattended while in use.
• Do not use an appliance for any purpose other than its intended use.
• Do not place an appliance on or near a hot gas flame, electric element or
on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang over the edge of a table or
bench top or touch any hot surface.
• Do not operate any electrical appliance with a damaged cord or after the
appliance has been damaged in any manner. If damage is suspected, re-
turn the appliance to the nearest Appointed Service Centre for examina-
tion, repair or adjustment.
• For additional protection, recommend the use of a residual current device
(RCD) with a tripping current not exceeding 30mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water or any other liquid unless recom-
mended.
• Appliances are not intended to be operated by means of an external timer
or separate remote control system.
• This appliance is intended to be used in household and similar applica-
tions such as: staff kitchen areas in shops, offices and other working en-
vironments; farm houses; by clients in hotels, motels and other residential
type environments; bed and breakfast type environments.
BESCHREIBUNG DES GERÄTS
1. Measuring cap
Handy 60ml measuring cap.
2. Jug lid with removable ingredient cap
To provide the necessary safety, the lid seals tightly to the jug and
features a pouring hole, that allows you to add ingredients during the
processing.
3. 2 litre square jug
Inherent with superior blending performance the square jug design has
a large 2 litre capacity and is constructed from clear engineering grade
polycarbonate for its lightweight and impact resistant properties.
4. Stainless steel blade assembly
Configured to optimise all processing tasks and provide the ultimate
performance, the precision cut and sharpened stainless steel blade as-
sembly is mounted on a sealed bearing for faster speed and longer life.
5. Processing baton
Specially designed to assist during demanding processing tasks, the ba-
ton allows you to safely push food into the blades while the blender is
operating.
6. Removable blade assembly
Blade assembly is removable for thorough cleaning.
7. Dampener
The rubber dampener locates and keeps the jug stable in 4 positions
during processing, wipes clean and also protects the long life metal-
tometal driver.
8. Heavy-duty 1000 watt motor
Enables blade speeds to reach up to 20,000 revolutions per minute (RPM)
delivering the power to uniformly chop small or large quantities of ingre-
dients regardless of the load. Its high performance and reliability are
backed by a 5 year motor guarantee.
9. Non-slip feet
Heavy-duty non-slip feet ensure the blender remains stable and pre-
vents slipping on the bench top during use.
10. Cord wrap
Cord wraps away to keep bench top clean.
11. Variable speed dial
Turn the speed control dial in a clockwise direction and the blender au-
tomatically starts. The variable speed dial allows you to select continu-
ously variable motor speeds ranging from 7,000 to 17,000 revolutions
per minute (free load).
12. Pulse button
The Pulse feature provides short bursts of power, to activate depress
the Pulse button and hold down as long as needed. Ideal for crushing
ice, preparing breadcrumbs, grinding chocolate, nuts and biscuits and for
refreshing ingredients in the jug.

OPERATION

Lid assembly
The lid is easy to position on or remove, and to clean for quick operation,
see figure 1.
1. Simply push lid down firmly to seal.
2. To secure the measuring cap, slide it into the top of the rubber lid and
rotate to lock.
3. The measuring cap can be removed when using the processing baton or
when adding ingredients.
NOTE:
As there is no locking design we advise that you place your hand on the lid
as you initially start processing.