Clock Functions - IKEA KULINARISK Manual

ENGLISH

Clock functions

Clock functions table
Clock function
Time of day
Minute Minder
Duration
End
You can use the functions
Duration
same time to set the time for how
long the appliance should
operate and when the appliance
should deactivate. This lets you
activate the appliance with a
delay in time. First set the
Duration
Setting the clock functions
For Duration and End
function and temperature. This is not
necessary for the Minute Minder
to "Setting an oven function".
1. Press again and again until the
symbol for the necessary clock function
flashes.
2. Press or to set the necessary clock
function.
To set, change or check the time of day.
To set countdown time. This function has no effect on the op-
eration of the appliance.
To set the cooking time of the oven.
To set the time of day when the oven should deactivate.
and End at the
and then the End
, set an oven
. Refer
2
Application
The display shows the symbol for the clock
function you set. When the set time ends,
the symbol flashes and an acoustic signal
sounds for two minutes.
With the Duration
functions, the appliance
deactivates automatically.
3. Press a button to stop the signal.
4. Deactivate the appliance.
.
Cancelling the clock functions
1. Press
symbol for the necessary clock function
and
2. Press and hold the button
clock function goes out.
1
and End
again and again until the
flash in the display.
14
until the