4.2 T o Configure DCPMM Memory as App Direct Mode
Please complete all steps listed in Section 4.1 (pages 26-29). When the screen shown on the
previous page displays, select Create goal config and press <Enter>, the following screen
will display.
Setting All DCPMM Memory Modules to App Direct Mode
Please complete the procedures below to properly configure DCPMM memory as App Direct
Mode.
•
Select Platform as the default setting for the the item: Create goal config for. This will
set all DCPMM memory modules to App Direct Mode.
•
Set the values of "Reserved [%]" and "Memory Mode [%]" to 0.
•
Change Persistent memory type to App Direct as needed.
•
Scroll down to the screen and select "Create goal config" and press <Enter>.
•
Select Save from the Save & Exit menu, and press <Enter> to save the changes.
•
Reboot the system, and enter the BIOS utility again to continue with DCPMM configuration.
Note: Be sure to reboot your system for the changes you've made to to take effect.
Chapter 4: Configuring DCPMM Settings Using BIOS
B.1. Create Goal Config Main Menu
45