Functional Description; General Description - Hoffmann MORSO Operating Manual

Instructions Manual
MORSØ
Notch Cutting Machine
Model NF
FUNCTIONAL DESCRIPTION C-1

General Description

MORSØ-NF notch cutting machine is an important
help to cut window bars, mullions, and cabinet
front frames requiring haunch joints.
MORSØ-NF is a manual foot-operated machine.
The operation is easy.
MORSØ-NF notch cutting machine is provided
with 6 sliding longitudinal stops, fences (1500 mm)
on both the right and left side of the machine,
nose knives, side knives, chip-breaker, cock-bead
stops, centre stop, safety guard, and waste chute.
With the MORSØ-NF you achieve a quite smooth,
clean, and exact cut by cutting the work piece in
two cuts.
This is done manually on the MORSØ-NF.
The conveying (forward movement) of the knife
block is continuously adjustable.
A special lever system makes the operation of the
machine very easy. Twin return springs bring the
knife block back to starting position.
The height movement of the knife block (length of
stroke) is continuously adjustable.
The work pieces can be joined without any
finishing.