Safety; Safety Devices; Regulations; Machine - Hoffmann MORSO Operating Manual

BEWARE OF THE
EXTREME SHARP
KNIVES
Instructions Manual
MORSØ
Notch Cutting Machine
Model NF

SAFETY

Safety Devices

According to current safety regulations MORSØ-
NF must not be used without the following safety
devices:
2. Safety Guard (1) for knife block
Safety Regulations
On delivery of the machine to the consumer
guarantees that the MORSØ-NF notch cutting
machine is constructed and fitted according the
CEN/TC 142 (Safety Regulations for wood
working machinery).
At start and use of the notch cutting machine
MORSØ-NF the operator must pay attention to
current national

regulations.

If the operator does not observe the above
mentioned regulations the factory does not
guarantee for damages to the machine or the
operator.
The MORSØ Notch Cutting Machines (NF and
NEH) are designed and built as volume production
machines. When used for prolonged periods, e.g.
full production, the electro-hydraulic (NEH) is
recommended. The manual machine (NF) can be
considered for volume productions, bearing in
mind the limitations of the operator. It is not
recommended for one operator to constantly use
the NF machine for long periods.
J-1
and international safety