Changing Of Spare Parts - Hoffmann MORSO Operating Manual

Instructions Manual
MORSØ
Notch Cutting Machine
Model NF
SERVICE

Changing of Spare Parts

If it is necessary to change worn out or destroyed
parts we recommend that you proceed in the
following way:
1. In the index of the spare parts list (see page K-
1) it is shown in which specified list the spare
part can be found.
2. The specified list in question is used when
changing spare parts, as there are order
number, dismounting and mounting succession
of the spare part.
3. Example:
Parts in the drive equipment must be changed:
Figure K-1 shows that the parts are stated in
figure K-4. Under Pos. 12,13, and 14, the parts
necessary for the repair, the dismounting and
mounting succession are shown.
In the text part of the illustration the order
number and spare part designation are stated.
H-6