Stealth B-52 Owner's Manual page 40

SUSPENSION
Suspension is a key component of your Stealth Bike. Fork stanchions and preload adjustment should be checked periodically
and adjusted to suit the riders preferred setting. Always follow the manufacturer's instructions for use and maintenance.
All Shocks and forks used on Stealth Electric bikes are sealed units and should only be serviced by a qualified
Stealth B-52
Rear shock
Spring preload can be increased or decreased by adjusting the height of the lower spring collets using C spanners. The red
rebound damping adjuster can be found at the bottom of the shock, and the compression adjuster can be found on the top
of the shock reservoir.
1. Unlock the preload adjustment by loosening the top lock ring on the spring unit using the C spanner.
2. Rotate the spring and collet to increase or decrease the spring tension.
3. Re-lock the preload adjustment by turning the top lock ring clockwise until it locks against the spring retaining ring.
4. Tighten with C spanner.
5. Increase or decrease the rebound damping by turning the red rebound adjuster dial in the direction required (as
indicated on the bottom of the shock body).
6. Increase or decrease the compression damping by turning the black compression adjuster dial in the direction
required (as indicated on the top of the shock reservoir).
Preload adjustment
Forks - Refer to the manufacturers specific Owner's manual for adjustment details for all forks.
repair person
Rebound adjustment
STEALTH ELECTRIC BIKES OWNER'S MANUAL
Compression adjustment
V 2.4 PAGE | 40