Dc-1 Screens - Stealth B-52 Owner's Manual

Once the correct pin is entered, the bike is ready to ride.
The bike will require the security pin to be entered each time that the bike is turned on. To change this, please navigate to
the Settings page (as described below) and select Electronic Security. You will then have the following options:
•
Lock Bike: This requires the security pin to be entered each time the bike is turned on. Note: if the jumper is not
installed, you will have to enter the security pin each time that a bike is turned on.
•
Auto Lock Bike: Turning this on will require the security pin to be entered after an inactive period set by the user.
Note: if the jumper is not installed, you will have to enter the security pin each time that a bike is turned on.

DC-1 SCREENS

The DC-1 has three pages. Home, Info and Settings. To navigate from one page to the next, press the menu button. The
current page is highlighted in the top left corner of the screen. (Note: When the DC-1 is on the Settings page the throttle is
disabled, indicated by the power off icon). The B-52, F-37 and H-52 have the same formatting, however, the P-7 uses a
newer display with slight variances. Instructions are given for both in the following section.
HOME SCREEN (STEALTH B-52, F-37 AND H-52 MODELS)
The home page displays information needed while riding:
STEALTH ELECTRIC BIKES OWNER'S MANUAL
V 2.4 PAGE | 25