Stealth B-52 Owner's Manual page 11

Before installing the battery, make sure that the foam surrounding the battery position is in place and intact.
Carefully position battery in opening and push into place. Be careful that battery doesn't compress or pull on wiring or
brake lines as it is pushed into place. All wires, brake lines and gearbox controls should run above and below the battery,
nothing is to run between battery and side covers.
Gently position battery in bike
If the battery feels loose, add foam strips to the upper side of the housing so the battery fit is firm. Make sure that the
battery connectors are free and accessible.
Ensure foam is clean and clear of obstructions
Be careful that wires are not pinched when
fitting the battery
Add foam if battery is loose
STEALTH ELECTRIC BIKES OWNER'S MANUAL
V 2.4 PAGE | 11