Battery - Stealth B-52 Owner's Manual

STEALTH ELECTRIC BIKES OWNER'S MANUAL
7. INSERT JUMPER
The jumper will be taped to the inside of the side cover, this needs to be inserted into the underside of the DC-1 as shown.
The DC-1 won't store any ride or diagnostic information if the jumper is not installed. Make sure the
jumper is installed if planning to ride the bike in the near future.
Insert jumper into this position

BATTERY

Do not disassemble the battery case under any circumstances. Tampering with the battery will void
warranty and could lead to explosions causing serious injury or death.
Do not use any charging unit other than the approved Stealth battery charger. Failure to do so will void
the warranty and could result in death or serious injury
V 2.4 PAGE | 17