Gears - Husqvarna LiHD50 Workshop Manual

10.5 Gears

1
Loosen the circlip (A), lift off the washer (B), care-
fully lift up the "hook" (C) and lift off the cutting unit.
See figure 10.
2
Separate the parts as shown in the exploded view
drawing.
See figure 11.
Cleaning and inspection
Clean and check all parts thoroughly. Parts must
be replaced if cracked or showing signs of other
defects. Always use original spare parts.
3
Assemble in the reverse order.
44 – English
A
Fig.10
Fig.11
B
C