Replacing.the.blade.guard.-.Lihd60X./.Lihd70X - Husqvarna LiHD50 Workshop Manual

Safety equipment
8.11 Replacing the blade guard -
LiHD60X / LiHD70X
Always replace a damaged blade guard with a new
one.
A
Loosen the nut (A) holding the anchor plate (B).
Loosen the nuts (C 5x for 60X/70X, 7x for 60X
B
US). Lift off the blade guard (D) with anchor plate
C
D
(B) and separate them.
Assemble in the reverse order.
Tightening torque 3 ~ 4 Nm.
See figure 19.
Fig.19
English 33
–