NOTE: If this thermostat was set in the
Installer Settings to be non-programmable, then
you cannot set a user program. If you press the
PROG
HOLD
or
appear in the display, indicating there is no
program present. See section 5, "Setting User
Options" to change this setting.
Energy Saving Programs
This thermostat comes pre-programmed with a default energy saving
program. The following tables outline the pre-programmed times and tem-
peratures for heating and cooling in each of your 4 daily events. If you wish
to use these settings then no further programming is necessary:
4 Event
buttons, the word "NO" will
7 Day Programming
Factory Settings
4 Event
5-2 Day Programming– Weekday/Weekend
Factory Settings
Time: 6:00 am
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 8:00 am
Heat: 62˚ F (17˚ C)
Cool: 85˚ F (29˚ C)
Time: 6:00 pm
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 10:00 pm
Heat: 62˚ F (17˚ C)
Cool: 82˚ F (28˚ C)
All Days
Time: 6:00 am
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 8:00 am
Heat: 62˚ F (17˚ C)
Cool: 85˚ F (29˚ C)
Time: 6:00 pm
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 10:00 pm
Heat: 62˚ F (17˚ C)
Cool: 82˚ F (28˚ C)
9
Time: 6:00 am
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 8:00 am
Heat: 62˚ F (17˚ C)
Cool: 85˚ F (29˚ C)
Time: 6:00 pm
Heat: 70˚ F (21˚ C)
Cool: 78˚ F (26˚ C)
Time: 10:00 pm
Heat: 62˚ F (17˚ C)
Cool: 82˚ F (28˚ C)