Enco Control Technical Description page 8

1. HVAC
1.HVAC DHW
2.HVAC - - -
3.HVAC - - -
Configuring HVAC system
Choose HVAC type for setting up desired parameters:
1.1. HVAC settings
1. HVAC type DHW
2. HVAC state Auto
3. Recalculation 2
4. Transition 20
5. Integration 30
6. ECO temper. -10.0
7.NIGTH temper. -5.0
8.DAY temper. 0.0
9.Valves settings
10.Pump settings
11.Temper. settings
12.Temperatures
13.Curves
14.Schedule
Field Description
1.HVAC type Controller type
2.HVAC state Operating mode
3.Recalculation Recalculation time of drive control
4.Transition Transition time period during which circuit gradually changeovers from
one schedule to another
5.Integration Integration time
6. ECO temper. Desired temperature for economic mode
7. NIGHT Desired night temperature
temper.
8. DAY temper. Desired day temperature
9.Valves settings Settings of drive valve control (address)
10.Pump settings Settings of pump control (address)
11. Temper.
Settings
12.Temperatures Setting desired temperatures for control
13.Curves Settings of the heat curve depending on outside temperature
14.Schedule Weekly schedule of control
By pressing button "
1.1.2. HVAC state
1.Off
2.Manual
3.Auto
4.Aut.Off
5.Economic
6.Night
7.Comfort
•
Kulautuvos g. 45a , LT-47190 Kaunas
1. HVAC
1.HVAC DHW
2.HVAC HEAT
3.HVAC VENT
Settings of the temperature sensors (address)
" you can to change the value of the selected parameter:
Recalculation DHW
2
Yes No
•
Tel. (+370 37) 360234
Transition DHW
30
Yes
• •
Faks. (+370 37) 360358 info@axis.lt
ENCO Control
Technical description
No
•
www.axis.lt
8