Remote Communication; Explanation Of Abbreviations - Enco Control Technical Description

Remote communication

The device can communicate via Ethernet, GSM / GPRS. It supports protocols TCP / IP, UDP,
DHCP.
There is possibility to setup parameters, download archive files, and update the firmware
remotely.
The selected system messages are sent to the user remotely:
- Power supply Off / On;
- Changing of firmware (updating);
- Changing of the state of the logic inputs (high / low level);
Read archived data;
Change settings of HVAC and meter reading.

Explanation of Abbreviations

PSU
MCU
LCD
SIM
RFID
CN1
RTC
DC
AC
HVAC
Environmental conditions
Ambient temperature
Relative humidity
Degree of protection of housing to IEC 60529
Overall dimensions
Power supply
Power supply for 9 NO semiconductor relays
Mains supply for internal PSU
Backup battery
Internal Lithium battery for real time clock (RTC)
Inputs / outputs for connecting remote devices
•
Kulautuvos g. 45a , LT-47190 Kaunas
Power supply unit
Microprocessor
Liquid Crystal Display
Subscriber identification module (card)
Radio frequency identification
USB port
Real-time clock
Direct current
Alternating current
Heating, ventilation and air conditioning systems
• •
Tel. (+370 37) 360234 Faks. (+370 37) 360358
Technical description
5°C ÷ 55°C
Up to 93%
IP30 (The device is designed for
installation in a cabinet, corresponding to
the class IP65)
202 mm x 126 mm x 100 mm
230 V, 50 Hz, ~ 1,2 A for each of 9 relays,
~ 4 A total
230 V, 50 Hz, ~100 mA max;
12 V, 800 mA max., 1,2 - 2.2 Ah
3 V
•
info@axis.lt
ENCO Control
•
www.axis.lt
5