Enco Control Technical Description page 7

Main meniu
1. HVAC
2. General settings
3. Modules
4. Receivers
5. Temper. Sensors
6. Outputs/Inputs
7. Connection state
8. Set date & time
9. Lock configuration
Field Description
1. HVAC Settings for regulation of HVAC circuit
2.General Information about general device settings
settings
3.Modules Settings for reading external devices (meters)
4.Receivers Settings for clear channel of communication
5. Temper. Review and control of Status of temperature sensors connected to the
Sensors controller
6.Outputs/Inputs Review and control of status of Outputs/Inputs
7.Connection Status of communication systems
state
8.Set date & time Setting up date and time
9.Lock Lock possibility of configuration
configuration
1. HVAC system type selection
The controller is capable of controlling different HVAC systems (circuits).
1. HVAC
1.HVAC - - -
2.HVAC - - -
3.HVAC - - -
Field Description
1. - - - Circuit is off
2.DHW Hot water preparation circuit
3.HEAT Heating control circuit
4.VENT Ventilation control circuit
After selecting the type of desired system (circuit), click "OK" to return to the previous menu,
and when you return to the previous menu in the box that appears confirm you choice:
DHW
Yes No
In the same way, select all desired types of HVAC systems:
•
Kulautuvos g. 45a , LT-47190 Kaunas
1.1. HVAC settings 1.1.1. HVAC type
1.HVAC type - - - 1. - - -
2. DHW
3. HEAT
4. VENT
•
Tel. (+370 37) 360234
• •
Faks. (+370 37) 360358 info@axis.lt
ENCO Control
Technical description
•
www.axis.lt
7