Enco Control Technical Description page 12

3.1.4. Interf.
1. Mbus[0]
2. CL[0]
3. Inv.CL[0]
4. RS-232[0]
5. RS-232[1]
6. RS-485[1]
7. Waveport
Select data transfer rate. It should be the same as stated on readout device settings:
3.1.5. Baud rate
1. 300
2. 600
3. 1200
4. 2400
5. 4800
6. 9600
7. 19200
8. 38400
9.56700
10.115200
Set up parity. It should be the same as stated on readout device settings:
3.1.6. Parity
1. None
2. Odd
3. Even
4. Mark
5. Space
Select database (data archive), wherein will be stored data, collected from an external device:
3.1.7. Array
1. 0
2. 1
3. 2
4. 3
Set up device address or number (depending what applicable):
Addr|ID DHW
254
Yes No
Meter reading period:
Period DHW
3600
Yes No
3.1.10. Module data
1. Module Idle
2. Slaves found 12
Field Description
1. Module
2. Slaves found Displays the number of connected to the interface and scanned devices
•
Kulautuvos g. 45a , LT-47190 Kaunas
• •
Tel. (+370 37) 360234 Faks. (+370 37) 360358
ENCO Control
Technical description
• •
info@axis.lt www.axis.lt
12