Enco Control Technical Description page 13

the Internet, using specialized programs. The settings are analogous to modem settings:
4.1. Port settings
4. Receivers
1. Interf.
1. UART0
2. UART2 2. Baud rate
3. Parity
4. Bits
5. Stopbits
5. Temper. sensors
1. Reinit sensors
2. Sensors count 3
3. T[01] 49.95°C
4. T[02] 38.87°C
5. T[03] 15.01°C
Field Description
1. Reint sensors New search of all connected sensors
2. Sensors count Shows the number of sensors that have been found
3. T[xx] Shows temperature value of corresponding sensor. It is possible to
change the sensor number
6. Outputs/Inputs
1. Output0
2. Output1
3. Output2
4. Output3
5. Output4
6. Output5
7. Output6
8. Output7
9. Output8
10. Input0
11. Input1
12. Input2
13. Input3
14. Input4
15. Input5
16. Input6
The black dot inside the circle means that the input / output are active /actuated. An empty
circle (white circle) indicates that the input / output are not active / disabled.
7. Connection state
1. Modem connected
2. Signal quality 19
3. GPRS state
4. LAN state
Field Description
1. Modem Modem status indicates whether the device is connected to the GPRS
2. Signal quality Level of GSM signal
3. GPRS state Review of GPRS communication parameters
•
Kulautuvos g. 45a , LT-47190 Kaunas
clear channel communications
Off
9600
None
8
1
temperature sensors status:
review and control of inputs / outputs status
status of communication channel
•
Tel. (+370 37) 360234
for reading of data of externally devices via
• •
Faks. (+370 37) 360358 info@axis.lt
ENCO Control
Technical description
•
www.axis.lt
13