Technical Data - ILUMEN PIDBOX LIGHT Installation Manual

Ilumen
12 T
ECHNICAL DATA

Technical data

PV array / inverter input
Input PV voltage range
Output voltage to ground
Maximum total PV power
Maximum output current in operation
GRID (AC)
Nominal AC voltage
Nominal AC grid frequency
Power consumption in standby operation
Typical power consumption in operation
Maximum power consumption
General data
Dimensions (W x D x H)
Weight
Operating temperature range
Environmental conditions
PV connectors
Configuration
Maximum two MPPT per PIDbox Light
Maximum one MPPT per input (A/B)
None of the connected solar module poles may become grounded
1 screw connection for grounding the frames of the PV modules
The inverter manufacturer's approval is needed to place the PIDbox LIGHT
The client is responsible for getting the approval
This product will function with p-type solar cells.
If you want to apply this product to another technology, please contact iLumen
Various
Warranty
Certificates
Registration before use
Installation Manual Ilumen PIDbox Light v1.2
ILUMEN PIDBOX LIGHT
80 - 1000 V
Up to 1000 V
100 kWp (c-Si)
5 mA
100 to 240 V
47 to 63 Hz
< 0.2 W
8 W
20 W
270 x 200 x 75 mm
1.100 g
-25 to 60 °C (-13 to 140 °F)
Indoor version - IP30 - indoor use only
Outdoor version - IP65 – indoor / outdoor use (power supply IP30)
MC4
Up to 20 years
www.ilumen.be
www.myilumen.be
20