Power Supply - ILUMEN PIDBOX LIGHT Installation Manual

Ilumen
6.5 P
OWER SUPPLY
It is important that you only use the included DC power supply. When different power supply is
used, this will void warranty. First connect its DC side to the Ilumen PIDbox Light power input.
Next connect the AC side of the DC power supply to the unplugged power cord. You may connect
the DC side to the Ilumen PIDbox Light during installation. Don't connect the AC side until
commissioning.
Make sure that locking nut of the DC-power plug for the outdoor version is
tightened for insuring a waterproof product
Make sure you always mount the power supply itself in a dry environment eg. in
the nearest inverter
Plug the not used connectors in to avoid water ingress into the PIDbox.
It is allowed to cut the power plug from the power cord in order to connect the
cables directly to a fuse/circuit breaker inside a power distribution box. It is only
allowed to cut the AC-cable and not the DC-cable going to the PIDbox Light
Installation Manual Ilumen PIDbox Light v1.2
INDOOR
version
OUTDOOR
version
14