Using The Product - Philips 9000 Series Manual

14
English
2
1

Using the product

2 Put the small plug in the shaver and
connect the power plug to any 100V to
240V AC outlet. Use only the power cord
provided.
When you connect the shaver to the wall
socket, you hear a sound.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the product.
Always check the product and all
accessories before using. Do not use the
product or any accessory if it is damaged, as
this may cause injury. Always replace a
damaged part with one of the original type.
This symbol indicates that the shaver can be
used in the bath or shower.
- Use this shaver for its intended household
use as described in this manual.
- For hygienic reasons, the shaver should
only be used by one person.
- Trimming is easier when the skin and hair
are dry.
This product can only be used without a
cord.
This shaver is suitable for use in the bath or
shower. For safety reasons, it is therefore
not possible to use the shaver while it is
connected to the power outlet for charging.