Maintenance And Storage - Sabo 52-PRO S A Operator's Manual

• Do not change the basic settings of the engine or operate the engine at excessive speed.
Pos: 4.6. 33 / Inne nteil/Sich erh eitsvo rsch riften /Han dhab ung /Beim Sta rtvo rga ng Ant rieb nicht einsc halte n @ 0 \mo d_1 115 127 428 250_ 152 1.d oc @ 1 595
• During the starting process, do not switch on the drive if available.
Pos: 4.6. 34 / Inne nteil/Sich erh eitsvo rsch riften /Han dhab ung /Inb etrie bna hm e ... Fü ße .. . Siche rheits abst and z um Sc hneidw erkz eug ... @ 0\m od_ 111 512 754 8437 _15 21. doc @ 160 3
When you start the machine, make sure that your feet are at a sufficiently safe distance away from the cutting
blades.
Pos: 4.6. 35 / Inne nteil/Sich erh eitsvo rsch riften /Han dhab ung /Mas chine nicht hoc hgek ante t wer den ... s eitliche r Auswu rf ... nicht vor A uswurf kan al steh en @ 0\ mod _111 512 788 268 7_1 521. doc @ 16 06
When you start the motor, the machine must not be lying on its side or in a slanting position. If it is necessary to
hold the machine at a slant, always ensure that the cutting tools are pointing away from the person using the
machine, although only as far as absolutely necessary. In case of machines with side dejection, do not start the
motor in standing in front of the ejection channel.
Pos: 4.6. 36 / Inne nteil/Sich erh eitsvo rsch riften /Han dhab ung /Hän de o der Fü ße nicht i n die N ähe von dre hen den Teil en M ähe r @ 0\m od_ 1115 128 631 906 _15 21.d oc @ 160 0
Never put your hands or feet near or under revolving parts. Always make sure that your hands or feet do not get
under the housing. Always maintain a safe distance from the ejector opening.
Pos: 4.6. 37 / Inne nteil/Sich erh eitsvo rsch riften /Han dhab ung /Kerze nsteck er abzie hen Mä her @ 14 \mo d_1 281 6888 759 35_ 152 1.do c @ 1 121 97
Stop the motor, remove the spark plug connector, check that all moving parts have come to a complete standstill
and, if there is one, remove the ignition key:
– when leaving the machine;
– before you check, clean or carry out any work on the machine;
– before you eliminate jams or blockages in the ejection channel;
– before you remove a foreign body;
– if the machine starts to vibrate strangely.
Pos: 4.6. 38 / Inne nteil/Sich erh eitsvo rsch riften /Han dhab ung /F rem dkör per : du rch Fac hhä ndler pr üfen lasse n @ 0 \mo d_1 115 129 695 921_ 152 1.d oc @ 1 597
• If a foreign object has been encountered or if the machine becomes blocked, e.g. by driving onto an obstacle, a
specialist dealer must check whether parts of the machine have been damaged or deformed. Any necessary repairs
must also be carried out by an authorized specialist workshop.
Pos: 4.6. 39 / Inne nteil/Sich erh eitsvo rsch riften /Han dhab ung /sta rke Vibr atio n: du rch Fac hhä ndle r üb erp rüf en @ 0\m od_ 111 5129 817 765 _15 21.d oc @ 162 5
• If you notice unusually strong vibrations in your machine, you must have it checked by an authorized dealer.
Pos: 4.6. 40 / Inne nteil/Sich erh eitsvo rsch riften /Han dhab ung /Mo tor abst ellen w enn . ..Benzi nmä her, Seiten auswu rf @ 3\ mod_ 115 320 431 777 3_1 521. doc @ 17 683
Switch the engine off, and ensure that all moving parts have come to a complete standstill, and that the spark
plug key, if fitted, has been removed:
– if you have to lift or tilt the lawnmower, e.g. in order to transport it,
– when transporting the machine to and from the lawn
– when moving the machine off the lawn area;
– if the machine is left unattended for a few minutes;
– when adjusting the cutting height;
– before you re-fill the tank.
Pos: 4.6. 41 / Inne nteil/Sich erh eitsvo rsch riften /Han dhab ung /Benzin absp err hah n schli eße n M ähe r @ 0 \mo d_1 115 130 120 093_ 152 1.d oc @ 1 596
• If the engine is equipped with a petrol shut-off valve, this should be closed after mowing.
Pos: 4.7. 1 /I nnen teil/Siche rheit svors chrift en/W artu ng u nd Lag eru ng/1. 1 Wa rtun g un d L age run g @ 0 \mo d_1 115 184 2598 75_ 152 1.do c @ 1 633

Maintenance and storage

Pos: 4.7. 2 /I nnen teil/Siche rheit svors chrift en/W artu ng u nd Lag eru ng/Sch rau bver bindu nge n fes t ... siche rer A rbeitsz usta nd .. . @ 0 \mo d_1 115 184 3528 28_ 152 1.do c @ 1 645
• Ensure that all screws have been tightened securely and that the machine is in a safe working condition.
Pos: 4.7. 3 /I nnen teil/Siche rheit svors chrift en/W artu ng u nd Lag eru ng/Explo sionsg efa hr, Ger ät nich t mit gef ülltem Ta nk in geschl osse nen R äum en aufb ewah ren @ 0\ mo d_1 1151 844 834 68_ 152 1.doc @ 1 636
Never store a machine which still contains petrol inside a building where petrol fumes may come into contact
with naked flames or sparks or where they may ignite.
Pos: 4.7. 4 /I nnen teil/Siche rheit svors chrift en/W artu ng u nd Lag eru ng/Vor sicht, heiß @ 0\ mo d_1 1151 849 991 40_ 152 1.doc @ 1 650
The engine and exhaust reach very high temperatures during operation.
Allow the machine to cool down for at least 15 minutes before starting any maintenance or cleaning work.
Pos: 4.7. 5 /I nnen teil/Siche rheit svors chrift en/W artu ng u nd Lag eru ng/Bra ndg efa hr ve rm eide n @ 1 3\m od_ 128 0216 078 187 _15 21.d oc @ 110 026
• To reduce the risk of fire, keep the motor, silencer (exhaust) and fuel tank free from grass, leaves or leaking oil (grease).
When placing on the side, ensure that no oil or fuel comes out of the machine. Fire hazard!
Allow the motor to cool down before storing the machine in a closed room.
Do not store the machine in the vicinity of open flames or fire sources such as boilers or heaters.
Pos: 4.7. 6 /I nnen teil/Siche rheit svors chrift en/W artu ng u nd Lag eru ng/vo r je dem Mä hen ...Z usta nd ... Mess ers prü fen Mäh er Be nzin mähe r @ 19\ mod _13 4630 909 230 1_1 521. doc @ 15 164 5
Before you start mowing, always check the condition and firm attachment of the cutting blade. The blade
attachment screw must always be tightened by an authorised workshop. If the blade screw is too tight or too
loose, the blade coupling and cutter bar can become damaged or loose which can lead to serious injuries. A
worn or damaged blade must always be replaced.
Pos: 4.7. 7 /I nnen teil/Siche rheit svors chrift en/W artu ng u nd Lag eru ng/Ausw echsel n, Nac hschleif en .. . Auswuc hte n ... Messe rs Be nzinm ähe r n eu @ 10\ mod _12 5058 361 710 6_1 521. doc @ 86 710
Changing, regrinding and balancing the cutting blade must be carried out by an authorised professional workshop.
A wrongly assembled cutting blade coupling can allow the cutting blade bar to get loose and cause severe injuries.
An improperly ground and imbalanced cutting blade can cause strong vibrations and damage the lawn mower.
Pos: 4.7. 8 /I nnen teil/Siche rheit svors chrift en/W artu ng u nd Lag eru ng/Auf feste n Sitz d es Z ündk erz enste ckers acht en @ 13\ mod _12 802 152 905 91_ 1521 .doc @ 1 1004 3
• Make sure that the spark plug connector is firmly seated! Touching is only a risk if the spark plug connector is not
installed correctly.
Pos: 4.7. 9 /I nnen teil/Siche rheit svors chrift en/W artu ng u nd Lag eru ng/Besc hädig te Teile erse tzen @ 0\ mod _11 151 860 7009 3_1 521 .doc @ 16 34
• For reasons of safety, always replace worn or damaged parts.
Pos: 4.7. 10 / Inne nteil/Sich erh eitsvo rsch riften /Wart ung und La ger ung/Sc hutzh andsc huh e tr age n @ 0\m od_1 115 186 195 468 _15 21.d oc @ 164 6
7
GB