Advertisement
Quick Links
INSTALLATION GUIDE
I
NSTALLING
SDA C
ONNECTOR
Introduction
The Software is the Instrument ™ is a trademark of National Instruments Corporation. Product and company names are trademarks or trade names
of their respective companies.
321845A-01
Y
BNC-2810
OUR
B
LOCK
This installation guide describes how to connect a BNC-2810 to your
PCI/PXI-6810 serial data analyzer (SDA) and shows the BNC-2810
channel and signal connections.
The BNC-2810 is a connector block designed for use with a PCI/PXI-6810
serial data analyzer. You can use the BNC-2810 on a desktop or optionally
mount it on a Deutsche Industrie Norme (DIN) rail that conforms to the
Comité Européen de Normalisation Electrotechnique (CENELEC) 35 mm
standard. The BNC-2810 provides easy access to the following channels
and signals:
•
RS-232 channels 0 and 1
•
RS-485 channels 0 and 1
•
Programmable channels 0, 1, and clock
•
Input and output triggers
•
Digital input/output (I/O) lines 0 through 7
•
Output enable signals 0 and 1
•
External power supply
Refer to Getting Started with Your PCI/PXI-6810 Serial Data Analyzer for
more detailed information regarding these channels and signals.
© Copyright 1998 National Instruments Corp. All rights reserved.
January 1998
Advertisement
Related Manuals for National Instruments BNC-2810
Summary of Contents for National Instruments BNC-2810
- Page 1 Refer to Getting Started with Your PCI/PXI-6810 Serial Data Analyzer for more detailed information regarding these channels and signals. The Software is the Instrument ™ is a trademark of National Instruments Corporation. Product and company names are trademarks or trade names of their respective companies.
- Page 2 SH6868-D1 shielded cable DIN rail mounting hardware (optional) Typical Connection Figure 1 shows a typical connection of the BNC-2810 connector block to a PCI/PXI-6810 serial data analyzer. Use the following steps to install your BNC-2810: Insert one end of the SH6868-D1 shielded cable into the 68-pin connector on your BNC-2810 connector block.
- Page 3 2 SH6868-D1 Shielded Cable 5 PXI Chassis 7 Personal Computer 3 PXI Controller Figure 1. Typical BNC-2810 to PCI/PXI-6810 Connection You can now connect to the channels and signals of your PCI/PXI-6810 serial data analyzer. © National Instruments Corporation Installing Your BNC-2810 SDA Connector Block...
- Page 4 Signal Connections Figure 2 shows the BNC-2810 channel and signal connections. Figure 2. BNC-2810 Signal Connections Refer to your Getting Started with the PCI/PXI-6810 Serial Data Analyzer for signal connections to the 68-pin connector.