Battery Size Calculations - Siemens PAD-5 Series Installation Manual

Model PAD-5
1

Battery Size Calculations

3.4
Note 1: Standby/Alarm Battery Load values are adjusted upward to account for the effect of the boost cir-
cuit as the battery discharges.
Note 2: If NAC is configured as AUX, AUX current must be included in the ALARM column if AUX circuit is
configured as "Always ON"
Note 3: AUX current must be included in the ALARM column if AUX circuit is configured as "Always ON"
Note 4: For CDC ZONES, unused circuits should be selected as a shorting device.
36
Siemens Industry, Inc.
Smart Infrastructure
Battery Size Calculations
A6V101030358_en--_c