Basic Functions; Activating And Deactivating; Use With The Rearstation Compact; Care And Cleaning - Teufel RearStation Technical Description And Operating Instructions

Basic functions

Activating and deactivating

After you connected the mains adapter, the device is in
standby mode.
Activation
• Push the " " button (4) on the transmitter.
Switching to standby
• Push the " " button (4) on the transmitter.
Switching to "deep sleep mode"
• Press the „ "button (4) on the transmitter for more than
5 seconds.
The system is switched to the "deep sleep mode".
Thereby the wireless connection is turned off and the
power consumption is reduced to less than 0.5 W.
In "deep sleep mode" the power LED (5) flashes red.
The activation of the system by the receiver is
no longer possible in „deep sleep mode".

Care and cleaning

Clean the device regularly with a soft, damp microfibre
cloth. In the process, be absolutely sure to observe the
following notes:
Danger Risk of electric shock!
In contact with live parts, water can lead to
electric shock or short circuit.
• Ensure that no liquid penetrates the unit.
• Disconnect the mains plug before cleaning.

Protecting the environment

Disposing of the unit

Used units must not be disposed of
with household waste
If the unit is no longer operational, every
consumer is required by law to dispose of
used devices separate from household waste,
e. g. at a collection point run by the communal author-
ity borough. In this way, used devices can be recycled
6
• RearStation
(4)
Power LED
The power LED (5) is blue during normal operation. If
there is no radio connection with another device, the
power LED is red.

Use with the RearStation Compact

• To use with the RearStation Compact, read the enclo-
sed operating instructions.
• The coupling is fully automatic.
If the receivers are out of range or not con-
nected to the power supply, the RearStation will
automatically switch off after a brief flash of the
red LED.
Attention Risk of damage!
Using the wrong cleaning materials may dam-
age the delicate surface of the case.
• If possible use only plain water with no cleaning prod-
ucts. In case of stubborn marks, a mild soap solution
may be used.
• Under no circumstances should caustic cleaning prod-
ucts, white spirit, thinners, petrol or similar be used for
cleaning.
and waste materials disposed of in an environmentally
friendly manner.
For this reason, electrical equipment is labelled with the
displayed symbol.
(5)