Oil Alert®/Check Indicator - Honda EU7000is Owner's Manual

CONTROLS & FEATURES
OIL ALERT®/CHECK Indicator
The Oil Alert system is designed to prevent engine damage caused by an
insufficient amount of oil in the crankcase. Before the oil level in the crankcase
can fall below a safe limit, the OIL ALERT/CHECK indicator comes ON, and the Oil
Alert system will automatically stop the engine (the MAIN switch will remain in
the ON position).
The i-Monitor display will show "OIL" on the screen and the OIL ALERT/CHECK
indicator will illuminate.
If the engine stops or the OIL ALERT/CHECK indicator comes ON when you press
the ENGINE START button or pull the starter grip, check the engine oil level (see
page 47) before troubleshooting in other areas.
Even when oil is added to the engine, the generator will not restart until the OIL
ALERT/CHECK indicator is reset. To reset the OIL ALERT/CHECK indicator, turn
the MAIN switch to the OFF position, add the proper amount of oil (see page
47), and then turn the MAIN switch back to the ON position.
If the OIL ALERT/CHECK indicator blinks, consult an authorized Honda Power
Equipment dealer.
OIL ALERT/CHECK INDICATOR (RED)
It blinks.
36