Parallel Operation Outlets; Voltage Selector Switch - Honda EU7000is Owner's Manual

Parallel Operation Outlets

These outlets are used for connecting the EU7000is to another EU7000is
generator for parallel operation (see page 65). A Honda approved parallel kit
(optional equipment) is required for parallel operation. This kit can be
purchased from an authorized Honda Power Equipment dealer.

Voltage Selector Switch

Select the voltage before starting the engine.
Always disconnect or turn OFF all appliances or tools connected to the
generator before changing the voltage selector switch position.
The voltage selector switch changes generator output to produce "120 V ONLY"
or "120 V/240 V". If a 240 V appliance is connected to the 4-prong receptacle,
the switch must be in the "120 V/240 V" position. If only the 120 V 3-prong
receptacles are being used, select the "120 V ONLY" position.
SWITCH POSITION
• 120 V/240 V: The 120 V and
120 V/240 V receptacles can be used
simultaneously.
• 120 V ONLY: ONLY the 120 V
receptacles can be used. Do not use
the 120 V/240 V receptacle in this
position. The most power will be
available at the 30 A 120 V locking
plug receptacle.
PARALLEL OPERATION OUTLETS
CONTROLS & FEATURES
VOLTAGE SELECTOR SWITCH
120 V/240 V
120 V ONLY
29