Table of Contents
Advertisement
Available languages
Available languages
Grinding Wheel Classification
Besides the technical data as diameter, width and centre hole size the wheels
are labelled with a digit/number code. The meaning of that digit/number code
can be gathered from the table below.
Data Meaning
A
GRINDING MATERIAL
60
GRAIN SIZE
M
QUALITY
5
STRUKTURE
V
BINDER
Maintenance
Before each use, check your double grinder. Check the protective
equipment, the switch, and the power cord. Check for loose screws, poor
alignment, loose connections, broken parts and all other factors, which
might interfere with safe operation.
Turn the machine off immediately if an unusual sound is noticed or
unusual vibrations occur. If the machine shows any kind of damage, do
not continue using it but have it repaired by a professional or turn to our
customer support department.
Cleaning
Keep the machine clean, dry and free from grease and oil.
Use only mild detergent and a moist cloth to clean your tool.
Operation
Comment
A For Aluminium Oxide
C For Silicon Carbide
24 (coarse),30,36,46,54,60,70,80 (fine)
K (soft),L,M,N,O,P (hard)
Structural numbers indicating the degree of
porosity, these are not always present.
V = Ceramic
15
Advertisement
Table of Contents
