Safety Notes - Westfalia 83 79 06 Instruction Manual

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
Make sure the voltage corresponds to the type label on the machine.
Persons with limited physical, sensorial or mental abilities are not allowed
to use the machine, unless they are supervised and briefed for their safety
by a qualified person.
Never leave the double grinder unsupervised when in use. Keep out of
reach of children or persons in need of supervision.
Never move the machine by pulling the cord. Make sure the cord cannot
get caught in any way. Do not wind the cord around the machine and do
not bend it.
Wear personal protective equipment. Always wear safety
goggles to prevent your eyed when using the double grinder.
Do not use damaged grinding wheels. Check the wheels for
cracks and other damage before each use.
Grinding wheels, flanges, discs and other accessories must precisely fit
the shaft of the grinder. Tools which do not precisely fit the shaft vibrate
and may cause loss of control.
The permitted speed of the tool must be at least equal to the maximum no
load speed of the power tool. Accessories which rotate faster than permit-
ted may be destroyed.
Diameter and thickness of the grinding wheels must conform to the
requirements of your power tool. Wheels of the wrong size cannot be
shielded or controlled.
Use only grinding wheels which conform to the technical data in this
manual and on the wheels.
Regularly confirm whether the spark deflector and the work piece support
are not further than 2 mm away from the grinding wheel. If necessary,
readjust the spark deflector and the work piece support.
The grinding wheels will rotate for some time after the engine has been
turned off. Never try to stop the wheels by hand.
Wear suitable clothing when using the grinder. Synthetic materials may be
damaged by flying sparks. Tight clothing will not get caught in moving
parts easily.

Safety Notes

9