Resource Manager Delay - National Instruments MXI Series Getting Started

Chapter 6 NI-VXI Configuration Utility
Note This field is effective only when the PCI-MXI-2 is at its default logical address of 0.
The PCI-MXI-2 is the Resource Manager only if its logical address is 0.
PCI-MXI-2 for Linux

Resource Manager Delay

The only option under the Resource Manager portion of the Logical
Address Configuration Editor is the Resource Manager Delay control.
This field specifies the time in seconds that the Resource Manager (RM)
waits before accessing any other VXI/VMEbus device's A16 configuration
registers.
RM Delay Range
0 to 65535 s
Figure 6-5 shows the Device Configuration Editor. The following
paragraphs describe the options you can select for each of the fields.
Figure 6-5. PCI-MXI-2 Device Configuration
6-10
Default Value
5
ni.com