Setting The Master Remote Controller - Daikin VRV REYQ96MTJU Design, Installation & Testing Instruction

Si39-406
5.5

Setting the Master Remote Controller

For RXYQ series
When one outdoor unit is connected with several indoor units.
For REYQ series
When one BS unit is connected with several indoor units.
However, it is possible to changeover to program dry operation with slave remote controllers if the
system is in cooling operation set by the master remote controller.
Operation Manual
When the system is installed as shown in figure 14 and 15, it is necessary to designate one of
the remote controllers as the master remote controller.
Only the master remote controller can select heating, cooling or automatic (only REYQ series)
operation.
The displays of slave remote controllers show "
they automatically follow the operation mode directed by the master remote controller.
F
" (changeover under control) and
Operation Procedure
207