Table of Contents
Advertisement
10. ACCESS SAVED FILES
Ethernet cable
Access files saved on microscope
To access files saved on the internal storage of the microscope, the
microscope itself must be connected to a network. Use one of the
two methods below:
Method 1
- Connect the cable from the wall socket to the microscope. Then,
connect a computer to the same network either by cable or WiFi.
Method 2
- Connect a computer and the microscope to a stand-alone router
without internet acess to create a closed network. This solution is
useful if you cannot connect the microscope to your network
Regardless of method, verify that an IP address of the microscope
is displayed in the microscope System information. If no IP address
is stated, check that all cables are connected correctly or consult a
network administrator.
Afterwards, follow the description below matching your operating
system to access the files:
NB: xxxxx denotes the microscope serial number which is available
on the product label and via the System information window in the
microscope Setup menu.
Access files with Windows operation system:
•
Open the File Explorer and type: \\tagarno-snxxxxx
Access files with mac operation system:
•
Open the Connect to server window and type:
smb://tagarno-snxxxxx/
•
Press connect
Choose one
WiFi
Ethernet cable
In both cases, a window will appear and you can type:
•
User name: \public (Windows) or public (mac)
•
Password: pub1234
Here, you'll be able to save, view, copy, move and rename files.
Access files saved on USB memory stick
Unplug the USB memory stick from the microscope and insert it
in a computer. Here, you'll be able to save, view, copy, move and
rename files.
17
Advertisement
Table of Contents
