tagarno FHD PRESTIGE Manual page 12

SETUP MENU (3/5)
4. Auto capture mode
To automatically capture images at a certain interval, activate the auto
image capture mode.
5. Auto interval
Set the function to automatically capture images at a certain interval.
Intervals start from 2 seconds and up. Start/stop the interval capturing
by pressing the image button on the control box.
6. Monitor auto detect
Turn off to manually set monitor width
7. Monitor width
Manually set your monitor width, if you do not wish to use the automatic
monitor auto detect, which is enabled by default. This automatically
changes the magnification level shown in the OSD. Please note that
manually changing the Monitor width while Monitor auto detect is
enabled, will disable the Monitor auto detect function.
8. System units
Choose to display metric or imperial units when using the microscope.
9. Numeric format
Here you can select the numeric format based on your preference.
Choose between 1,234.56, 1.234,56 or 1 234,56.
10. System language
The following languages are available as system language:
Chinese, Danish, English, French, German, Hungarian, Italian, Japanese,
Korean, Polish, Romanian, Russian and Spanish.
11. Keyboard layout
Select your horizontally language by pressing buttons left or right on the
XPLUS control box. The available languages are listed alphabetically.
The microscope is by default set to GB. The available languages are:
AF, AL, AT, BE, BR, BW, CA, CD, CZ, DE, DK, EE, ES, FI, FR, GB, HR, HU, IS,
IT, LT, LV, ME, MT, NL, NO, PH, PK, PL, PT, RO, RU, SE, SI, SK, SN, TZ, US,
VN and ZA.
12. Foot switch configuration
With this function, you can choose between Zoom Only and Zoom/
Focus on the foot switch.
Zoom/Focus is the default configuration. Setting the option to Zoom
Only allows you to zoom in/out with the foot switch, even if the
microscope is set in Manual focus mode by the control box.
13. Scale bar
Scale bar indicates the size of an inspected object. The scale bar will
operate in standard magnification and in all activate applications, except
for Verification lines and Measurement application. The scale bar will
adjust to match current magnification level. Activated by default.
NB: The scale is approximate and does not take lens distortion into
account.
14. Time
Set the current time, which will affect the time registered when saving
images.
15. Date
Set the current date, which will affect the date registered when saving
images.
12